Metzner Maschinenbau GmbH
Suche / Search
Produktbeschreibung:

The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and  6mm²  cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks to the sensors for diameter and material recognition, the AM 1000 works extremely precisely. Another special feature is the tool-free replacement of guides and rollers. This means that the AM 1000 can be changed over in just one minute. With the extensive interface preparation, the machine can be optimally expanded with peripheral devices and adapts to all customer requirements. The compact design with retractable touch-screen and the low weight of only 28 kg also offer special comfort. This makes the AM 1000 especially easy to transport.

Kategorieslider-ID: liste_baureihe_am
Produkt Technische Details:
Technische Details als Tabelle:
Functions/Programs AM 1000
Cutting to length
Stripping with full pull-off
Stripping with partial pull-off
Stripping in multiple steps
Slitting -
Multiple stripping -
Flat cables optional  ≤ 10 mm Width
BOM processing
Material end detection -
Cable length correction
Recipe data management
Length measurement system optional
   
Machine Parameters  
Transport unit belt/roll roll
Networking / MES interface (Industry 4.0) optional
Remote maintenance ✔ PC integrated
Cable cross section stranded conductor 6 mm²
Max. outer diameter  10 mm
Cable length 35 mm - 99.999 mm
Max. Cable transport speed 220 m/min
Max. Stripping length full stripping Cable start: 40-120 mm | cable end: 0-30 mm
USB/Ethernet
Electrical connection 230V; 50 Hz
Pneumatic connection 6bar
Dimensions in mm 390x600x370 (PC on top 540)
Weight 28 kg
Rotary cutting unit -
Screen 12" touchscreen, tiltable
Produkt Feature 1 Titel: Remarkably short changeover times
Produkt Feature 1 Beschreibung:

Thanks to the tool-free change of transport rollers and guides the AM 1000 is ready to process another cable in less than 60 seconds.

Produkt Feature 1 Icon:
Produkt Feature 1 Bild:
Produkt Feature 2 Titel: Operating convenience that sets standards
Produkt Feature 2 Beschreibung:

With an extra-large 12" touch screen, operating a compact cable dispenser has never been so pleasant and effortless.

Produkt Feature 2 Icon:
Produkt Feature 2 Bild :
produkt Subfeature 1 Titel: 66% more power than usual
Produkt Subfeature 1 Beschreibung:

With its extra power, the AM 1000 differs advantageously from other machines and you have the right machine today if you have bigger tasks to deal with tomorrow.

Produkt Subfeature 1 Icon:
Produkt Subfeature 2 Titel: Standard with automatic detection of cable diameter and cable end
Produkt Subfeature 2 Beschreibung:

With automatic detection of the cable diameter, the AM 1000 ensures the shortest possible set-up times for new cables and automatically interrupts your work when the cable ends.

Produkt Subfeature 2 Icon:
Produkt Subfeature 3 Titel: Equipped as standard for processing cable lists and controlling printers
Produkt Subfeature3 Beschreibung:

The standard equipment with database software makes the AM 1000 the perfect all-rounder for complex and simple tasks.

Produkt Subfeature 3 Icon:
Produkt Download 1 Titel: Metzner Product Catalogue
Produkt Download 1:
Produkt Download 2 Titel: Brochure Cut & Strip
Produkt Download 2:

Metzner AM 1000: Cable assembly machine with maximum convenience

The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and  6mm²  cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks to the sensors for diameter and material recognition, the AM 1000 works extremely precisely. Another special feature is the tool-free replacement of guides and rollers. This means that the AM 1000 can be changed over in just one minute. With the extensive interface preparation, the machine can be optimally expanded with peripheral devices and adapts to all customer requirements. The compact design with retractable touch-screen and the low weight of only 28 kg also offer special comfort. This makes the AM 1000 especially easy to transport.

All technical details at a glance

Functions/Programs AM 1000
Cutting to length
Stripping with full pull-off
Stripping with partial pull-off
Stripping in multiple steps
Slitting -
Multiple stripping -
Flat cables optional  ≤ 10 mm Width
BOM processing
Material end detection -
Cable length correction
Recipe data management
Length measurement system optional
   
Machine Parameters  
Transport unit belt/roll roll
Networking / MES interface (Industry 4.0) optional
Remote maintenance ✔ PC integrated
Cable cross section stranded conductor 6 mm²
Max. outer diameter  10 mm
Cable length 35 mm - 99.999 mm
Max. Cable transport speed 220 m/min
Max. Stripping length full stripping Cable start: 40-120 mm | cable end: 0-30 mm
USB/Ethernet
Electrical connection 230V; 50 Hz
Pneumatic connection 6bar
Dimensions in mm 390x600x370 (PC on top 540)
Weight 28 kg
Rotary cutting unit -
Screen 12" touchscreen, tiltable

PDF 3099 KB

Special features

Remarkably short changeover times

Thanks to the tool-free change of transport rollers and guides the AM 1000 is ready to process another cable in less than 60 seconds.

Operating convenience that sets standards

With an extra-large 12" touch screen, operating a compact cable dispenser has never been so pleasant and effortless.

66% more power than usual

With its extra power, the AM 1000 differs advantageously from other machines and you have the right machine today if you have bigger tasks to deal with tomorrow.

Standard with automatic detection of cable diameter and cable end

With automatic detection of the cable diameter, the AM 1000 ensures the shortest possible set-up times for new cables and automatically interrupts your work when the cable ends.

Equipped as standard for processing cable lists and controlling printers

The standard equipment with database software makes the AM 1000 the perfect all-rounder for complex and simple tasks.

Similar Products

Downloads

All relevant Downloads.

Metzner Product Catalogue

PDF 19749 KB

Brochure Cut & Strip

PDF 3651 KB

Any questions?

We would be delighted to assist and advise you to find the right solution.

 

Contact

Get in touch with us 

 

HOW TO FIND US

Messerschmittstr. 30 in 89231 Neu-Ulm