Metzner Linear Accumulator
Buffer between feeder/cable unwinder and the downstream processing system
Linear storages serve as a "buffer" between the feeder or cable unwinder and the downstream processing system and control the feeding speed.
Linear storages represent an excellent solution for all cable processing where high acceleration and processing speeds occur or extremely tensile sensitive cable wires are processed. In the event of increased material requirements, the cable processing machines pull the material from the linear storage, which has a cable reserve of up to seven metres. At the same time, the linear storage signals an increased material requirement to the material dispenser or the feeding device, so that they increase the dispenser speed. If cable processing stops or slows down, the linear storage also passes this information on to the upstream peripheral devices.
Linear storages are compatible with all cable unwinders of the "Metzner DR series" and offer an optimal storage system for flexible cable wires of up to 18 mm diameter. They are either mounted directly on the cable unwinder or in combination with a feeding device.
Special features
For outer diameters of up to max. 18 mm
The linear storages are suitable for flexible cable wires of up to max. 18 mm outer diameter.
Lowest possible tensile load
The use of a linear storage ensures cable feeding with the lowest possible tensile load.
Cable storage approx. 7 m
The cable supply of the linear storage is approx. 7 m.
High accelerations and high processing speeds
The linear storage allows high acceleration and high processing speeds on the wire processing machine.
Pneumatic control of the storage supply
The storage capacity of the linear storage is pneumatically controlled.
Similar Products
Downloads
All relevant Downloads.
View
Download